Connect amplifiers, receivers, soundbars, and AVRs to a broad range of subwoofers with this Audioquest Irish Red Subwoofer Cable. Solid 0.5% Silver conductors minimize distortion, Foamed-Polyethylene preserves dynamic contrasts, and a Metal-Layer Noise-Dissipation efficiently dissipates high-frequency noise. The result is clearer, naturally beautiful music, intelligible dialogue, and thrilling sound effects.
Solid 0.5% Silver Conductor
Solid 0.5% Silver-Plated Copper Conductors are a superbly cost-effective way to turn up the “sharpness” for a subwoofer, enhancing articulation and intelligibility.
Metal-Layer Noise-Dissipation
It’s easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference from modulating the equipment’s ground reference, Irish Red subwoofer cable requires AQ’s Noise-Dissipation System. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical “reference” ground plane, which in turn causes a distortion of the signal.
Foamed-Polyethylene Insulation
Any solid material adjacent to a conductor is part of an imperfect circuit. Both wire insulation and circuit board materials absorb energy. They store some of this energy and then release it as distortion.
Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials. This helps the Irish Red Subwoofer cable maintain a pure signal.
Symmetrical Coax Geometry
Identical positive (+) and negative (-) conductors prevent the shield from being used as an inferior audio conductor.
Cold-Welded, Gold-Plated Terminations
This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the Irish Red subwoofer cable employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal is chosen for low distortion instead of machinability.
Technical Specifications
- Metal: Solid 0.5% Silver
- Noise Dissipation: Metal-Layer
- Geometry: Symmetrical Coax
- Terminations: Cold-Welded, Gold-Plated
- Signal Type: Analogue
- Jacket: Red on Black Braid
Reviews
There are no reviews yet.