-Primare A34.2 UFPD Power Amplifier

Our Price £1,349.00 RRP £1,750.00 Save: £401.00
SKU
26967
The Primare A34.2 is a 2 x 150 watt stereo power amplifier utilising proprietary UFPD technology, designed to provide high power output with very low distortion for Primare's PRE32 audiophile preamplifier

The Primare A34.2 is a 2 x 150 watt stereo power amplifier utilising proprietary UFPD technology, designed to provide high power output with very low distortion for Primare's PRE32 audiophile preamplifier and all other preamps, as well as multi-channel audio processors. It uses two discrete UFPD amplifiers, each channel incorporating unbalanced (RCA) and balanced (XLR) inputs, as well as high quality gold plated speaker terminals, trigger and RS232 control inputs

Ecologically the Primare A34.2 power amplifier is far superior to conventional Class A/B designs being extremely efficient without generating excessive heat. In standby it consumes only 0.3W. The Primare A34.2 can easily be switched to bridged mode and will then provide one fully balanced mono channel capable of delivering up to 550W into 8 ohms.

Primare's UFPD technology provides for the possibilities of a full-range 'audiophile' Class D design. It is a new and significant Class D technology which is remarkable for its performance consistency across the entire audio bandwidth. Traditional Class D amplifiers have a signature response, which is fabulous at low frequencies but can sound harsh and brittle at higher frequencies due to circuit instability produced by insufficient feedback. UFPD actively adjusts the feedback required to deliver a higher level of gain across the entire audio band, maintaining performance irrespective of load (impedance) variations. Primare's UFPD treats all signals equally, keeping distortion very low at all frequencies. With a very wide 'load independent' frequency response UFPD is able to drive any speaker while maintaining control and accuracy.

In conjunction with UFPD, Primare uses an isolated PFC (Power Factor Control) technology in the power supply, which controls the current from the mains voltage so that it is a pure sine wave with the same frequency and phase as the mains voltage. This means that even if 1000W is taken from the mains, other equipment in the room will not be affected.

  • Output power 2 x 150W @ 8 ohm
  • Bridged output power 1 x 550W @ 8 Ohm
  • Utilising proprietary UFPD technology
  • Inputs 2 x RCA / 2 x XLR switchable, RS232, trigger (12V)

  • More Information
    Brands Primare
    Product Specifications
    • Total harmonic distortion
    0.005%
    • Signal to noise ratio
    0.5dBV
    • Dimensions (HxWxD) in mm
    105x430x385
    • Input impedance
    15k Ohms
    • Output impedance
    0.3 Ohm @ 1kHz
    • Power Output
    2 x 150 Watts @ 8 Ohms
    • Inputs
    2 x RCA, 2 x XLR
    • Power Consumption
    Standby: 0.3 Watts
    • Weight
    10.5Kg
    • Frequency Response
    20Hz - 20kHz

    Warranty information for Primare:

    Primare Warranty

    Primare products are designed and manufactured to the highest quality standards. However, if something does go wrong with the product we are here to help. From your date of purchase your product is warranted against faulty materials or workmanship for a period of 12 months.

    This guarantee applies to all Primare Products including Blu Ray Players, CD Players, Digital Streamers and Digital to Analogue Convertors as well as Hi Fi Amplifiers and receivers Providing you with peace of mind and the assurance of premium Quality.

    
    • HiFix is a holding of Hi-Fi Excellence Ltd
    • VAT No. 585 1698 93
    • Company No. 2540830