-ISOL 8 POWERLINE DISTRIBUTION UNIT
The Isol-8 PowerLine is a family of compact Power Distribution Units (PDU) that are designed to lift system performance, harnessing ISOL-8's power expertise at an affordable price
-ISOL 8 POWERLINE DISTRIBUTION UNIT
Every system needs a quality power supply to give of its best. The Isol-8 PowerLine is a family of compact Power Distribution Units (PDU) that are designed to lift system performance, harnessing ISOL-8's power expertise at an affordable price. In combination with the range of IsoLink shielded mains cables, PowerLine offers a flexible but powerful solution tailored for those who put performance and value first.
All versions feature an anodised 6mm thick CNC cut aluminium top plate. This forms an ideal mechanical foundation: non-magnetic and non-resonant. Input is by IEC connector with a Neutrik PowerCon an option on many variants. The enclosure is beautifully built in stainless steel for long lasting good looks and immunity from induced magnetic fields. Quality output connectors mounted on acrylic enable true star earthing, providing a further lift in performance. Input is by 10A IEC connector for maximum convenience. Spike and surge protection is present across all outputs for total peace of mind. Each high quality power outlet has a hinged cover to IP54, protecting unused outlets from dirt, dust and little fingers. Wiring is carefully selected silver plated copper with PTFE insulation throughout, providing excellent power transmission properties, reliably supplying your system for years to come.
Isol-8 Power Line Standard: The Isol-8 Powerline Standard Power Distribution Unit is a compact, high quality, integrated mains distribution and conditioner for supplying a complete system. Three and six outlet versions are available, each incorporating three filter groups. In the three outlet version each socket is supplied via its own filter stage. This topology means that each output is protected from interference generated by another, as well as that by incoming noise. The six outlet version doubles up outlets for each filter stage. Output one has a high power parallel filter for amplifiers, projectors and active sub-woofers. This carefully designed not to limit peak current demand, which allows maximum dynamic expression. Output two is optimized for source components. A multistage filter effectively attenuates any mains borne pollution. Output three is also optimized for source components. With an additional filter stage, this output provides an extra degree of isolation for critical source components.
Isol-8 PowerLine Plus: The Isol-8 Powerline Plus Power Distribution Unit carries a number of features to lift performance still further. Mains earth has finite impedance and does behave as an antenna, perfect for capturing RF energy. The PowerLine Plus earth line choke is custom made with a special high permeability core. This gives massive attenuation of any RF noise in the system earth bus and signal ground. The input connector is a rhodium plated IEC by Oyaide. Finally, a single pole shunt filter is fitted. This topology allows direct connection of the live and neutral conductors to the load, providing effective noise attenuation without any impact on peak current delivery. Look out for our special bundle deal with IsoLink2 mains cable.
Isol-8 PowerLine Ultra: The Isol-8 Powerline Ultra Power Distribution Unit is fully power conditioned and optimised for audio. One Direct Connection outlet is provided, filtered by a high current shunt filter, and is suitable for loads such as amplifiers. The remaining outputs are for source components and benefit from Isol-8s Trans-modal filter technology. Noise in mains wiring can be transmitted and induced in many ways, some are easier to deal with than others. As a result, many power conditioners are not completely effective. Isol-8s Trans-modal filters effectively attenuate all modes of transmitted and induced mains noise, so you can be sure that your system benefits from the cleanest possible power.
Isol-8 PowerLine 1080: The Isol-8 Powerline 1080 Power Distribution Unit is optimised for supplying AV systems. One outlet has a dedicated filter to eliminate noise generated by video displays, dramatically improving picture quality. Another has a filtered high current Direct Connection for amplifiers. The remaining outlets are for source components, Isol-8's Trans-modal filter technology providing pure, clean power so that your AV system performs at its very best.
Anodised 6mm thick CNC cut aluminium top plate Silver plated copper with PTFE insulation throughout Excellent power transmission properties Stainless steel enclosure Spike and surge protection