QED Reference XT25 Speaker Cable Per Metre

£5.99
SKU
43484
The QED Reference XT25 Speaker Cable uses X-Tube™ technology which allows electrons to better flow towards the periphery of a conductor as the frequency increases, resulting in a thin layer on the outside of the cable being used if the frequency is high enough. With a low-density polyethylene dielectric, this cable will ensure a clean and clear reproduction of sound. *Speaker Plugs not included.

QED Reference XT25 Speaker Cable Per Metre

The QED Reference XT25 Speaker Cable uses X-Tube™ technology which allows electrons to better flow towards the periphery of a conductor as the frequency increases, resulting in a thin layer on the outside of the cable being used if the frequency is high enough. This “Skin Depth” varies over different materials at a fixed frequency, and using copper means that a conductor with a cross sectional area that is larger than 0.66 mm squared will not have all of that area available for an analogue music signal to use. X-Tube™ has effectively eliminated this problem by placing all of the conducting material around a central hollow insulating rod. A.C signals that are changing magnetic fields generated by the flow of current set up eddy currents in nearby conductors, forcing the current to flow in only the furthest areas from the conductors carrying a current in the same direction and vice versa.

This is known as the “proximity effect”, and has a detrimental influence over the distribution of current within a speaker cable when utilising X-Tube™ technology. The the QED Reference XT25 Speaker Cable, the proximity effect and the skin effect has been dealt with using a combination of Aircore™ and X-Tube™ technologies into a new X-Tube variation that forms conductors into a tube-like shape with a hollow centre, thus allowing the electric field that contributes to the skin effect to act towards the centre of the conductor from where the conductive material has been removed, and maintain current densities at higher frequencies.

Instead of using a braided structure, the QED Reference XT25 Speaker Cable uses a ring of conductors in separate bundles – formed in order to maintain only a loose electrical association which – which have then been twisted into a 90mm lay, allowing no single conductor bundle to remain on the inside or outside of the cable for long enough to become an audible problem. The QED Reference XT25’s geometry allows it to promote signal distribution that is more consistent and provides a more accurate musical reproduction.

The QED Reference XT25 Speaker Cable will deliver a notable improvement over any cable in a similar price category, offering low DC resistance without increasing in size losing any of its flexibility. This has been made possible through the enlarging of the cable’s cross-sectional area to 2.5mm squared of 99.999% oxygen-free copper, instantly gaining a low DC resistance and producing a reproduction of sound that is much more accurate.

Electrical signals, when moving at the speed of light through a wire, do so through electromagnetic waveforms that exist within the dielectric surrounding the wire’s conductors and within the conductors themselves. Moving electrons will facilitate generation of electromagnetic waveforms with a drift velocity of only a few centimetres per second, which makes it important to ensure the dielectric material used in the insulation of the cable’s central conductors is of a type that will permit electromagnetic waveforms to be established without causing any appreciable loss.  Dielectric loss is proportional to the permittivity of the material used and should be as close to unity as possible. The QED Reference XT25 uses a new low-density polyethylene (LDPE) dielectric that has been specifically formulated for this cable. The LDPE dielectric has the absolute lowest relative permittivity that is currently possible at 1.69. The use of this LPDE dielectric and careful control of conductor spacing has resulted in an intu
itive cable that offers a very low capacitance per metre and a dissipation factor of 0.0001 at 10 kHz.

  • New low-density polyethylene dielectric
  • Award winning heritage guaranteed
  • 99.999% Oxygen-free copper
  • X-Tube™ technology
  • Please note - termination plugs not included
  • Cable is unterminated, but banana plugs are available here at extra cost
More Information
Brands QED
Product Specifications

Cross-sectional area

               

2.5 mm2

 

Wire gauge

               

 

14 AWG

 

Jacket outside diameter              

 

 

3.96 mm

 

Loop inductance

               

 

0.52 μH/m

 

Loop resistance

               

 

13.4 mΩ/m

 

Capacitance      

 

 

35.0 pF/m

 

Dissipation factor @ 10 kHz

               

 

0.0001

 

Conductors

               

 

10 x 19/0.13 mm

 

Insulation

               

 

LDPE jacket with 100% coverage of Aluminium Mylar tape wrap

 

Plugs and spades            

 

QED Airloc™ Forte banana plugs


Product Brochures

QED Brochure
Your Delivery:

Orders received before 3:00 pm* will be despatched the same day and can be delivered for next working day, (except bank holidays).  For you convenience you can choose multiple shipping options on the checkout page. We will also email with your tracking and dispatch information.

30 Day Returns Policy

HiFix is committed to selling quality products which we hope you will love, we do understand, however, that there maybe a time when you need to exchange or return something you have bought. We really do hope you are pleased with your purchase but should you wish to return anything bought from us, we will be happy to refund or exchange a product within 30 days.

*Due to the Covid situation we have amended our shipping cutoff time to 1pm. Please see more on COVID updates here.

Name SKU Qty Lead time
QED Reference XT25 Speaker Cable Per Metre 43484 50 In Stock for Immediate Dispatch

Warranty information for QED Cables:

 Image result for qed logo

QED products are designed and manufactured to the highest quality standards. However, if something does go wrong with the product we are here to help. From your date of purchase your product is warranted against faulty materials or workmanship for a period of 12 months.

This guarantee applies to all QED Products including award winning .leads and cables including HDMi video cables, Audio cables and speaker Cables. Providing you with peace of mind and the assurance of premium Quality.


  • HiFix is a holding of Hi-Fi Excellence Ltd
  • VAT No. 585 1698 93
  • Company No. 2540830