Dual Foil high frequency effective shielding Vibration damping internal and external casing High purity multi-strand copper conductors Unique internal wiring geometry 1m 1.5m & 2m lengths available Designed and built in the UK - with CE conformance
|What Hi Fi 5 Star Review||SUPERSCREEN - A mains cable that focuses on the nuances of music and delivers picture quality that's vibrant and clean|
|Options - 1.5M||19173||0||Warehouse stock availability 2 to 3 working days.|
|Options - 2.0M||19245||0||Warehouse stock availability 2 to 3 working days.|
|Options - 1.0M||19172||0||Warehouse stock availability 2 to 3 working days.|
Chord products are designed and manufactured to the highest quality standards. However, if something does go wrong with the product we are here to help. From your date of purchase your product is warranted against faulty materials or workmanship for a period of 120 months.
This guarantee applies to all Chord Products including:.Analogue and digital Cables, Video HDMi Cables, Phono Cables and Speaker Cables. Providing you with peace of mind and the assurance of premium Quality.
To see all our reviews click here: TRUST PILOT
RRP: £560.00 SAVE: £30.00
Our Price: £530.00
4mm² cross section copper conductors, individual dielectric insulation Individual dielectric insulation chosen for its sound enhancing electrical properties The stripped cable ends are secured by specially profiled clamp screws
RRP: £1,799.00 SAVE: £100.00
Our Price: £1,699.00
7x 150W (8 ohm), 7x 180W (6 ohm) RMS power (20Hz-20 kHz) Current feedback discrete power amplifier High current power supply with toroidal power transformer Marantz reference-grade power supply filter capacitors and high speed, high current discrete power transistors Low impedance continuous drive capability Highest sound quality design based on pure surround philosophy Copper plated chassis Gold plated, high grade speaker terminals Flasher input, DC trigger (in/out), Remote control (in/out) Available in Black Low-noise electronic power source for the DC motors For use with the TecnoDec, GyroDec and Gyro SE turntables The Michell HR features the novel Never-Connected circuit User-adjustable speed control on its back plate Unique 'Zero feedback' topology - Inherently natural, high resolution musical reproduction. Separate voltage and current amplifiers - Exceptional load tolerance, drive power and finesse. RCA/BAL input options - Flexibility of installation. Fully buffered Chain output - Easy Bi/Tri amping. Fully mapped over-current protection - For pure, safe 80A pk to pk current delivery. Extensive use of Star-Earthing technique - Enhanced low level resolution. Non-magnetic lightweight die-cast chassis - Interference-free low-resonance enclosure. MC-BUSTM System BUS - Integrated system control with the CYRUS range. Full RS232 control MC-BUS connectivity Inputs - RCA phono or XLR balanced, 12V trigger Outputs - 4mm/spade/bare wire loudspeaker terminals, RCA chain out Power supply - 475VA Toroidal transformer Output power 8 ohms - 175 Watts, 4 ohms - 325 Watts Provice clean power to audio components A fully regulated 300W DC power supply No changes to the existing components Mk 1 power supply upgraded by the Cyrus factory to full PSX-R2
RRP: £109.00 SAVE: £14.00
Our Price: £95.00
Over-moulded plugs High pressure crimping No screws Heavy duty IEC plug Delivers a consisent performance
Helical-array geometry Long Grain Copper Cold-weld system
The Rega Neo Power Supply is an advanced turntable power supply that provides fine speed adjustment that is user controllable, as well as an advanced anti-vibration motor circuit and electronic speed change for added convenience. Improving the speed stability and rotational speed accuracy, and reducing motor noise, the Rega Neo Power Supply will feel right at home with any compatible Rega turntable.
With the same digital signal processing (DSP) generator that can be found in the Rega RP10, the Rega Neo Power Supply has been built upon high stability crystal. This power supply’s DSP generator will divide the accurate signal from the crystal in order to extract the exact frequency that is required to turn the platter at the selected speed. The Neo Power Supply will do this whilst providing a near perfect sinusoidal waveform to drive the 24v motor.
Compatible with the Following Turntables:
P3-24 / RP3 / Planar 3 2016 / RP6 / P5 / P7 / RP40 special edition / RP8 Or any older Rega turntable fitted with Rega’s aftermarket 24v motor upgrade kit.