Audioquest Wolf RCA Subwoofer Cable
Audioquest Wolf RCA Subwoofer Cable
The Audioquest Wolf is part of Audioquest's new range of high-performance subwoofer cables. The Audioquest Husky boasts the following key features:
SOLID 10% SILVER CONDUCTORS: Solid conductors eliminate strand-interaction distortion and reduce jitter. Solid silver-plated conductors are excellent for very high-frequency applications. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a solid silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality subwoofer cables.
FEP AIR-TUBE INSULATION (FEP is a Fluoro-Polymer): Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then later released as distortion. All of Wolf’s conductors use Air-Tube insulation because air absorbs next to no energy, and FEP is the best extrudable solid insulation and absorbs less energy than other materials. The FEP Air-Tubes used in Wolf have almost nothing but air around the solid 10% silver conductors.
DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest’s DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.
CARBON-BASED 4-LAYER NOISE-DISSIPATION SYSTEM (NDS): 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment’s ground plane.
TRIPLE-BALANCED GEOMETRY: The three conductors in “Triple-Balanced” Husky cables ensure that whether prepared with RCA or XLR plugs, the positive and negative signals have equally low-distortion conducting paths. The 100% coverage shield is never used as an inferior conductor.
COLD-WELDED HANGING-SILVER DIRECTLY OVER PURE RED COPPER SYSTEM: This plug design enables a perfect heat-free connection between cable and plug. The connection between the plug and conductors is made using AQ’s Cold-Welded System, which provides a superior connection that ensures that the structural integrity of the conductor is kept completely intact. The Cold-Welded System refers to a combination of high pressure at the point of contact and the use of copper- or silver-impregnated paste. (Husky’s silver conductors get silver paste.) XLR plugs are also available.
GROUNDING: Sometimes there is a hum problem unless the subwoofer and AV receiver (or surround-sound processor) are attached to each other using a separate wire. If your system has a hum problem, try attaching the little spade-lug tails to the metal chassis of the subwoofer amplifier and to the chassis of the sending component. Usually, this extra wire will not be needed.
SOLID 10% SILVER CONDUCTORS FEP AIR-TUBE INSULATION 72V DIELECTRIC-BIAS SYSTEM (DBS) CARBON-BASED 4-LAYER NOISE-DISSIPATION SYSTEM (NDS) TRIPLE-BALANCED GEOMETRY Also available with XLR termination
Orders received before 3:00 pm* will be despatched the same day and can be delivered for next working day, (except bank holidays). For you convenience you can choose multiple shipping options on the checkout page. We will also email with your tracking and dispatch information.
30 Day Returns Policy
HiFix is committed to selling quality products which we hope you will love, we do understand, however, that there maybe a time when you need to exchange or return something you have bought. We really do hope you are pleased with your purchase but should you wish to return anything bought from us, we will be happy to refund or exchange a product within 30 days.
*Due to the Covid situation we have amended our shipping cutoff time to 1pm. Please see more on COVID updates here.
|Audioquest Wolf RCA Subwoofer Cable 3.0m||32074||0||Warehouse stock usually available in 2 to 3 working days.|
|Audioquest Wolf RCA Subwoofer Cable 5.0m||32075||0||Warehouse stock usually available in 2 to 3 working days.|
|Audioquest Wolf RCA Subwoofer Cable 8.0m||32076||0||Warehouse stock usually available in 2 to 3 working days.|
|Audioquest Wolf RCA Subwoofer Cable 12.0m||32077||0||Warehouse stock usually available in 2 to 3 working days.|
|Audioquest Wolf RCA Subwoofer Cable 16.0m||32078||0||Warehouse stock usually available in 2 to 3 working days.|
|Audioquest Wolf RCA Subwoofer Cable 20.0m||32079||0||Warehouse stock usually available in 2 to 3 working days.|
|Audioquest Wolf RCA Subwoofer Cable 2.0m||32100||0||Warehouse stock usually available in 2 to 3 working days.|
Warranty information for Audioquest:
Audioquest products are designed and manufactured to the highest quality standards. However, if something does go wrong with the product we are here to help. From your date of purchase your product is warranted against faulty materials or workmanship for a period of 24 months.
This guarantee applies to all Audioquest Products including: analogue and digital Cables, Video HDMi Cables, Phono Cables and Speaker Cables. Providing you with peace of mind and the assurance of premium quality.