| Basket Preview: |
Basket
is empty
 |
|
|
 |
Michell Arm Plate Decoupling Kit |
SKU: 24885 |
|
|
|
 |
24
MONTHS
GUARANTEE |
|
|
Details:
| The Michell De-coupling kit can be installed on all GyroDec and Orbe turntable variants to mechanically de-couple the tonearm and mounting plate from the rest of the turntable, thereby preventing ambient noise from transferring from the turntable to the tonearm/cartridge. Unlike the originally supplied armboard mounting which is via solid standoffs and through-bolts, the Michell De-coupling kit's new standoffs have a threaded stud protruding from one end and a threaded hole on the other. The end with the threaded hole also has a nitrile rubber isolating o-ring embedded in its top surface. |
| To install, the studded ends screw directly into the metal chassis of the turntable, then the armboard is placed on top of the standoffs. Next 3 short Allen head bolts are screwed into the standoffs, holding the underside of the armboard against the o-rings. A grounding strap is then attached to maintain the anti-static grounding of the chassis. Instructions are included. A self-adhesive tonearm cable fixing device is also included to allow correct dressing of the arm cable. |
| The most noticeable change with the Michell De Coupling Kit is an improvement to the fine texture and nuances on both vocals and music and more accurate timbre on wood and string instruments. This is a VERY inexpensive upgrade considering the sound improvement and ease of installation |
- Can be installed on all GyroDec and Orbe turntable variants
- Mechanically de-couple's the tonearm and mounting plate from the rest of the turntable
- Prevents ambient noise from transferring from the turntable to the tonearm/cartridge
| Try Michell Arm Plate Decoupling Kit with these... |
|
|
|
